The Leader in Mustang Performance Suspensions

Bumpsteer Gauge

This section is filled with tools to make installation and tuning of your Mustang easier. Make sure you know what tools can speed up your installations before taking your car apart!


Product Image Product(s)- Part # Price
Spring Installation Tool, Front Control Arm

Spring Installation Tool, Front Control Arm

This MM tool is invaluable when installing lowering springs on the front of your Mustang. This tool bolts to the front control arm, and guides the bottom coil of the spring into its proper position on the control arm as...
MMT-8 $13.95

... more info

Rear Upper Control Arm Bushing Tool

Rear Upper Control Arm Bushing Tool

Rear Upper Control Arm Bushing Tool makes it much easier to change the rear control arm bushings at the differential. The bushings are a press fit in the differential housing, and are difficult to access when not...
MMT-1 $29.95

... more info

Coil-Over Spanner Wrench

Coil-Over Spanner Wrench

The Coil-Over Spanner Wrench is used for adjusting your MM coil-over lower spring perch when pre-loading the spring is necessary. Can be used on both the front and rear MM coil-over kits.
MMT-2 $9.95

... more info

Camber Gauge

Camber Gauge

Fits all applications This is the gauge we use when aligning our race cars. With accuracy better than 1/8-degree, it easily matches the performance of much more expensive gauges. The range of camber adjustment is from...
MMT-3 $59.95

... more info

Bumpsteer Gauge

Bumpsteer Gauge

Use MM's Bumpsteer Gauge when you need to extract the most performance from your car, don't settle for a generic bumpsteer fix. A highly tuned car, or any vehicle with modified suspension geometry, must be individually...
MMT-4 $119.95

... more info

IRS Differential Rear Mount Bushing Removal Tool

IRS Differential Rear Mount Bushing Removal Tool

This helpful tool which is also included with our IRS Urethane Differential Bushing Kits, allows the simple removal of the stock rubber bushing from the IRS rear differential mount. Reinstalling the urethane is then...
MMT-5 $18.95

... more info

IRS Subframe Bushing Removal Tool, 1999-04 Cobra

IRS Subframe Bushing Removal Tool, 1999-04 Cobra

MM developed this tool to help with the removal of the stock rubber bushings from the IRS subframe. Not only does this tool make the job much easier, it also reduces the time spent removing the stock bushings by at...
MMT-6 $24.95

... more info

MM Tool Package for IRS Differential Cooler

MM Tool Package for IRS Differential Cooler

MM Tool Package for OC-10 Installation There is no need to spend time searching for the proper taps and drill bits with this Maximum Motorsports Tool Package. Includes the thread taps required to install the OC-10 MM...
MMT-7 $69.97

... more info

Tokico D-Spec Adjuster Extensions, pair

Tokico D-Spec Adjuster Extensions, pair

Extended adjuster to relocate the adjuster knob for Tokico D-Spec adjustable rear shocks. Improves access to adjuster knob. Moves knob 8", to above the interior panels . Easy installation: Screws onto upper end of...
TOK-00100X $29.95

... more info

Adjuster Tool, Tokico D-Spec Dampers

Adjuster Tool, Tokico D-Spec Dampers

Adjuster Tool for Tokico D-Spec Dampers, fits struts and shocks Tool to adjust Tokico's D-spec series dampers Fits both struts and shocks Includes chain to attach it to your key ring. When not in use, the tool is...
TOK-00101 $11.95

... more info



© Maximum Motorsports, Inc.   3430 Sacramento Dr., Unit D   San Luis Obispo, CA 93401   (888) 378-8830

Your IP Address is: 38.107.191.81   |   Powered by Zen Cart