The Leader in Mustang Performance Suspensions

1-1/8" 1986 SVO master cyl.

1-1/8" (1986 SVO) Master Cylinder Swap, Manual

When you are swapping from the stock 1987-93 5.0L Mustang master cylinder to the 1986 SVO Mustang 1-1/8" master cylinder while converting to manual brakes, listed below are the parts required, parts we recommend, and items you may also need.

These parts fit
  • 1987-93 Mustang 5.0L
  • 1-1/8" (1986 SVO Mustang) master cylinder
  • Manual brake conversion
Required Items
  • Master cylinder
  • Master cylinder installation kit
  • Manual brake conversion kit
Recommended Items
  • Adjustable brake proportioning valve
  • Kit to disable or eliminate the stock proportioning valve
  • Brake fluid


Product Image Product(s)- Part # Price
Manual Brake Conversion Kit, 1979-93

Manual Brake Conversion Kit, 1979-93

Parts used when converting a Mustang from power brakes to manual brakes. Includes new pedal arm, firewall adapter block, pushrod, and hardware. Does not include master cylinder or brake lines. This kit fits 1979-93...
MMBAK-10 $199.95

... more info

Manual Brake Pedal Kit, 1979-93

Manual Brake Pedal Kit, 1979-93

Manual brake pedal kit with correct mechanical pedal ratio for manual brakes. Includes parts used when converting a Mustang from power brakes to manual brakes except the firewall adapter block. Includes new pedal arm,...
MMBAK-11 $149.95

... more info

Master Cylinder, 1984-86 SVO Mustang, 1-1/8” bore, fits 1979-93 Mustang

Master Cylinder, 1984-86 SVO Mustang, 1-1/8” bore, fits 1979-93 Mustang

1-1/8" bore brake master cylinder originally fitted to 1984-86 SVO Mustang. New. Fits Direct replacement for 1984-86 SVO Mustang With appropriate installation kit, fits 1979-93 Mustang with power-assisted brakes. With...
BMC-1 $89.00

... more info

Manual Brake Installation Kit, SVO master cylinder in 1987-93 Mustang

Manual Brake Installation Kit, SVO master cylinder in 1987-93 Mustang

Hard-lines and fittings used with manual brake conversion, to connect SVO master cylinder to stock 1987-93 Mustang 5.0L brake system This kit fits Manual brake conversion 1984-86 SVO master cylinder, BMC-1 (1-1/8" bore)...
MMBAK-2.1 $36.95

... more info

Brake adapter fittings, SVO master cylinder

Brake adapter fittings, SVO master cylinder

Adapter fittings to connect SVO master cylinder to standard 3/16" diameter brake lines with 3/8-24 inverted-flare tube nuts This kit fits 1984-86 SVO master cylinder, BMC-1 (1-1/8" bore) Any car that has been re-plumbed...
MMBAK-2.2 $23.95

... more info

Adjustable Brake Proportioning Valve

Adjustable Brake Proportioning Valve

Brake Proportioning Valve for adjusting brake bias This product fits Direct bolt-in fitment on 1979-93 Mustang Fitment for other Mustang years requires adapter fittings or cutting and flaring of the rear brake hard...
BPV-1 $42.97

... more info

Brake Proportioning Valve Eliminator kit, 1987-93

Brake Proportioning Valve Eliminator kit, 1987-93

Fittings replace the stock brake proportioning valve when an adjustable valve is installed. What is this product used for? The stock brake proportioning valve must be removed or disabled whenever an adjustable...
MMBAK-6 $19.97

... more info

Brake Proportioning Valve Plug, 1979-2004

Brake Proportioning Valve Plug, 1979-2004

Plug used to disable the stock brake proportioning valve when an adjustable valve is installed What is this product used for? The stock brake proportioning valve must be removed or disabled whenever an adjustable...
MM-2450-A $16.97

... more info



© Maximum Motorsports, Inc.   3430 Sacramento Dr., Unit D   San Luis Obispo, CA 93401   (888) 378-8830

Your IP Address is: 72.44.48.122   |   Powered by Zen Cart