Quick Links

MM News

Home  ::  Suspension  ::  Mustang Front Suspension  ::  Urethane Bushings  ::  Front Swaybar Endlinks

Powergrid Front Sway Bar Endlinks, 2015 Mustang

Powergrid Front Sway Bar Endlinks, 2015 Mustang
Actual product may differ from photo.

$164.99

  • Part # 12M-60

Description 

Larger Image

Powergrid front swaybar endlinks improve performance by allowing adjustment to eliminate swaybar preload. Low-friction ends eliminate binding and allow for smooth load transitions.

  • Adjustable THK resin ball-stud links. Laboratory and field durability testing ensures they meet stringent OEM requirements.
  • Waterproof seal
  • Low friction in the joint
  • Up to 50 degrees of articulation

Why do I need adjustable endlinks?
The OEM stock front endlinks are fixed in length. While part of a good, simple design, this lack of adjustability can be a detriment to tuning a Mustang for higher levels of performance. A stack-up of production tolerances can often lead to preloading of the front swaybar. The preloaded swaybar in turn affects the car's corner weights. Uneven diagonal corner weights will adversely affect handling by aiding cornering in one direction while hindering cornering in the opposite direction. For example, your Mustang will understeer more when turning in one direction than it does when turning the other direction.

The Powergrid endlinks let you easily adjust the length of the swaybar endlinks. Properly setting the length will improve handling by eliminating any swaybar preload.

The Powergrid endlinks are not limited to just track-driven cars. Anyone who's taken the time to upgrade even their street-driven car's suspension should consider the Powergrid endlinks. The influence of the swaybar on your Mustang's suspension is as important on the street as it is on the track.

Related Products

  • Adjustable length to eliminate swaybar preload
  • Resin-ball links eliminate friction and allow for smooth load transitions
  • Adjustable-length THK resin ball-stud links. Laboratory and field durability testing ensures they meet stringent OEM requirements.
  • Waterproof seal
  • Low friction in the joint
  • Up to 50 degrees of articulation

Fits

  • 2015 S550 Mustang front swaybar
  • Stock and aftermarket direct-replacement swaybars

How do I adjust the endlinks to eliminate preload?

  • Remove the stock endlinks.
  • Powergrid endlinks must be adjusted with your Mustang at ride height, and the suspension settled. It's best to drive at least the front of your Mustang onto low ramps or blocks. The rear can be jacked up and the tires then supported on stands to match normal ride stance. The goal is to have the same weight on each front tire as when on the ground.
  • Set one endlink length to match the stock endlink length.
  • Install on one side.
  • Adjust the other endlink length so it installs with the studs going through the holes easily, without forcing. Any twisting of the swaybar to aid installation is causing a preload.
  • Tighten all hardware.

Each THK Ball Link is composed of a high-precision ball bearing, a die-cast holder, and a shank connected to the ball by a special welding method. Through a unique production process, the mirror surface of the ball bearing is copied onto the inner mounting surface for perfect contact between them, achieving outstanding wear resistance, exceedingly smooth motion, and high strength.