Larger Image
Installing a coil over kit with 14mm shaft and 2.5" springs on a car that already has S197/S550/S650 Maximum Motorsports Caster Camber Plates requires this conversion kit. The upper spring perch supplied in many aftermarket coil over kits will NOT properly fit to the bottom of the MM Caster Camber Plates. This conversion kit provides a new spring perch and related items to allow installation of most aftermarket struts with 14mm shafts to the S197/S550/S650 MM Caster Camber Plates.
Better by design
- MM's Engineering Team firmly believes that a low-friction thrust bearing should be installed between the upper spring perch and the bottom of the caster camber plate's spherical bearing.
- Many aftermarket coil over kits include an upper strut mount with a spherical bearing. But, they do not include any means to adjust camber or caster, and they do not include a low friction thrust bearing. The Mm5CO-8 kit provides the solution.
Why do I need this MM kit?
If you already have the S197/S550/S650 MM caster camber plates on your car, this kit allows you to install a coil over kit with a 14mm strut shaft without purchasing the an entire new camber plate kit. This Mm5CO-8 kit is a less expensive alternative.
Having a low-friction thrust bearing provides several benefits.
Construction
- Aluminum upper spring perch
- Steel upper thrust cone
Related Products