Wilwood AERO6 6-piston front brake kit, road race, 2005-14 Mustang, 14"

Fits: 2005-2014 Mustang

• 14.00" diameter x 1.25" wide rotors: slotted
• 6-piston AERO6 calipers, anodized (gray) finish
• Pads: BP-35 compound, Wilwood pad plate #6620
• Stainless steel braided hoses included
• Road race kit with high temperature race pads. Extended low temperature (street) use will cause premature rotor and pad wear
• Minimum wheel size: 18" - check the wheel clearance drawing in the Wilwood instructions before ordering

This kit is configured for dedicated road racing on all 2005-2014 model Mustangs. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 14.00" diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.

Wilwood part number: 140-13882