Wilwood Dynalite 4-piston front brake kit, drag race, 1987-93 Mustang, 10.75"

Fits: 1987-1993 Mustang 5-lug (and 1984-86 SVO), with factory 5-lug spindles

• 10.75" diameter x 0.35" wide rotors: drilled
• 4-piston Forged Dynalite Internal calipers, anodized (gray) finish
• Pads: BP-10 compound, Wilwood pad plate #7112
• Requires Wilwood 220-6471 stainless steel braided hose kit
• Drag racing kit - not recommended for street use
• Minimum wheel size: 15" - check the wheel clearance drawing in the Wilwood instructions before ordering
• Requires modification to the original spindle
• Hub offset +.49" (moves the wheel outward)

Mixing Fox and SN95 brake kits? Call us first.
If you are combining an SN95 (1994-2004) kit with a Fox (1979-1993) kit, or a Fox kit with an SN95 kit, please call us at (888) 378-8830 before ordering so we can run the calculations to make sure the kits will work together. If needed, we can ask Wilwood to do a no-cost caliper substitution to get the brake bias correct.

FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.

Wilwood part number: 140-4503-BD