Wilwood Dynapro 4-piston rear brake kit, drag race, Ford 9" Big Ford New Style ends, 11.25"

Fits: Ford 9" rear end with Big Ford New Style (late Torino, large 3.150" bearing) housing ends and 2.50" axle offset - the ends used on most aftermarket 9" housings for 1979+ Mustangs

• 11.25" diameter x 0.35" wide rotors: drilled
• 4-piston Dynapro Lug Mount calipers, anodized (gray) finish
• Pads: BP-28 compound, Wilwood pad plate #7812
• Drag racing kit - not recommended for street use
• Minimum wheel size: 15" - check the wheel clearance drawing in the Wilwood instructions before ordering

Mixing Fox and SN95 brake kits? Call us first.
If you are combining an SN95 (1994-2004) kit with a Fox (1979-1993) kit, or a Fox kit with an SN95 kit, please call us at (888) 378-8830 before ordering so we can run the calculations to make sure the kits will work together. If needed, we can ask Wilwood to do a no-cost caliper substitution to get the brake bias correct.

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44" diameter and a smaller 11.25" diameter for clearance with bead lock rims. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear. Kits are available in Single and Dual caliper configurations.

Wilwood part number: 140-14129-D