Wilwood Dynapro Radial 4-piston front brake kit, drag race, 1994-04 Mustang, 11.75"

Fits: 1994-2004 Mustang (also 1979-93 Mustangs converted to 1994-95 SN95 spindles/axle)

• 11.75" diameter x 0.35" wide rotors: drilled
• 4-piston Narrow Dynapro Radial Mount calipers, anodized (gray) finish
• Pads: BP-10 compound, Wilwood pad plate #7812
• Requires Wilwood 220-6458 stainless steel braided hose kit
• This kit can be used on earlier Mustangs if you have updated to SN95 spindles, but also requires a hose fitting adaptor. Order one MMBAK-4 adapter. Please note in the special instructions field if you have a 1993 or earlier car.
• Drag racing kit - not recommended for street use
• Minimum wheel size: 15" - check the wheel clearance drawing in the Wilwood instructions before ordering

Mixing Fox and SN95 brake kits? Call us first.
If you are combining an SN95 (1994-2004) kit with a Fox (1979-1993) kit, or a Fox kit with an SN95 kit, please call us at (888) 378-8830 before ordering so we can run the calculations to make sure the kits will work together. If needed, we can ask Wilwood to do a no-cost caliper substitution to get the brake bias correct.

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16" or larger wheels generally do not fit inside the popular 15" drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8" steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81" rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

Wilwood part number: 140-10015-D