Wilwood Superlite 4R 4-piston front brake kit, road race, 1994-04 Mustang, 12.88"

Fits: 1994-2004 Mustang (also 1979-93 Mustangs converted to 1994-95 SN95 spindles/axle)

• 12.88" diameter x 1.25" wide rotors: plain face
• 4-piston Forged Superlite 4R calipers, anodized (gray) finish
• Pads: BP-35 compound, Wilwood pad plate #7420
• Stainless steel braided hoses included
• This kit can be used on earlier Mustangs if you have updated to SN95 spindles, but also requires a hose fitting adaptor. Order one MMBAK-4 adapter. Please note in the special instructions field if you have a 1993 or earlier car.
• Road race kit with high temperature race pads. Extended low temperature (street) use will cause premature rotor and pad wear
• Minimum wheel size: 17" - check the wheel clearance drawing in the Wilwood instructions before ordering

Mixing Fox and SN95 brake kits? Call us first.
If you are combining an SN95 (1994-2004) kit with a Fox (1979-1993) kit, or a Fox kit with an SN95 kit, please call us at (888) 378-8830 before ordering so we can run the calculations to make sure the kits will work together. If needed, we can ask Wilwood to do a no-cost caliper substitution to get the brake bias correct.

Kits in this competition group are configured for use in production category road racing that allow brake upgrades, but limit modifications to four-piston calipers and 12.88" rotors. FSL4R/ST Type III anodize finish calipers use Thermlock pistons to resist fade and extend service life by reducing the heat transfer into the caliper from the pads. HD series directional vane rotors provide high cooling efficiency and durability mounted to the hubs with forged aluminum GT hats. Kits also include high temperature race compound pads, stainless steel flexlines, and premium grade hardware for installation in 17" and larger wheels.

Wilwood part number: 140-14114